User`s guide

146 Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide
Parameter Reference
The text box on this page can be easily modified by either pasting parsing rules into it from a text
file or directly modifying the contents of the control. See Chapter 6, “Media Gateway Parsers” for
further information on the creation and use of parsing rules.
INI File Parameter Name = ;-CPID RULES
3.15 Serial Ports Parameters
The following parameters are in the Serial ports group:
• Serial Port, COM1 Group
• Serial Port, COM2 Group (DMG2000 Only)
3.15.0.1 Serial Port, COM1 Group
The Serial port, COM1 group parameters are used to configure the DMG1000 Serial interface port
DIAGNOSTICS connector and the DMG2000 COM1 port connector. The system parameters in the
Serial port group include:
• Serial Port Baud Rate
• Serial Port Parity
• Serial Port Data Bits
• Serial Port Stop Bits
Serial Port Baud Rate
Description: Specifies the baud rate of the Media Gateway Serial port.
Allowed Values:
• 1200 = 1200 bps
• 2400 = 2400 bps
• 9600 = 9600 bps
• 19200 = 19200 bps
• 38400 = 38400 bps
Default Value = 38400
INI File Parameter Name = sysSerialBaudRate