User`s guide

Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide 145
Parameter Reference
3.14 TDM CPID Parsing Configuration
The TDM CPID Parsing Configuration data is included for T1 CAS in the DMG2000 unit and in
the Analog DMG1000 unit. For other models, this data can be accessed instead by navigating to the
TDM-->CPID Parsing link via the Web interface. Modifying this data affects the display parsing of
the Media Gateway.
Caution: The TDM CPID Parsing Configuration data should only be modified by advanced users of the
Media Gateway. You are strongly advised to backup your current configuration before proceeding.
See Section 2.6.1, “Exporting Configuration Information”, on page 41 for additional information
about backing up your configuration.
70 0x46 Only Restricted Digital Available
79 0x4F Service or Option Not Implemented
81 0x51 Invalid Call Reference Value
82 0x52 Channel Does Not Exist
83 0x53 A Suspended Call Exists, But This Call Identity Does Not
84 0x54 Call ID In Use
85 0x55 No Call Suspended
86 0x56 Call Having the Requested Call Identity Has Been Cleared
87 0x57 User Not Member of CUG
88 0x58 Incompatible Destination
91 0x5B Invalid Transit Network Selection
95 0x5F Invalid Message, Unspecified
96 0x60 Mandatory Information Element is Missing
97 0x61 Message Type Non-existent or Not Implemented
98 0x62 Message Incompatible With Call State or Non-existent
99 0x63 Information Element Not Implemented
100 0x64 Invalid Information Element Contents
101 0x65 Message Not Compatible with Call State
102 0x66 Recovery of Timer Expiry
111 0x6F Protocol Error, Unspecified
127 0x7F Interworking, Unspecified
Table 9. SIP to ISDN Mapping
ISDN Cause Codes