User`s guide

Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide 135
Parameter Reference
3.10 TDM Digital Parameters
The TDM Digital subgroup includes the following parameter:
• Telephony Switch Type
Telephony Switch Type
Description: Specifies the type of PBX telephony switch to which the DMG1000 is connected.
Note: This parameter does not apply to the Models DMG1008MTLDNIW, DMG1008LSW,
DMG1004LSW, DMG2030DTIQ, DMG2060DTIQ, and DMG2120DTIQ.
Note: The list of allowed values that will be displayed depends on your model type.
Allowed Values:
• None = No PBX Type has been selected.
• M1 = Nortel Meridian-1/Meridian SL-1
• Norstar = Nortel Norstar Key Systems
• Optiset_300 = Siemens Hicom North American Configuration
• Optiset_300_Europe = Siemens Hicom European Configuration
• Lucent = Lucent DEFINITY G3
• Magix = Merlin Magix
• NEC_IMG = NEC IMG
• NEC_IMX = NEC IMX
• NEC_NEAX = NEC NEAX or NEC 2400 IPX
• Rolm_8000 = Rolm 8000
• Rolm_9751_SW9005 = Rolm 9751 with software release 9005 or earlier
• Rolm_9751_SW9006 = Rolm 9751 with software release 9006 or earlier
Default Value = None
INI File Parameter Name = telPbxType
Note: If Optiset_300_Europe is selected as the Telephony Switch Type, the setting of subscriber Message
Waiting Indicator (MWI) lights is not supported and the Analog version of the DMG1000 (Models
DMG1008LSW, DMG1004LSW) should be used to set/clear subscriber MWIs on this switch type.
Note: Unit requires a restart if this parameter value is changed.