User`s guide

Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide 131
Parameter Reference
3.9.4 CPID Settings Group
The Analog parameters in the CPID Settings group include:
• Initial Wait for Inband CPID
• Inband CPID Complete Timeout
• CID to First Ring Timeout
• Analog Interface Type
• Central Office (Type I) Caller ID Type
• Central Office (Type I) Caller ID Alert Type
• Central Office (Type I) FSK Caller ID Expiration
• Central Office (Type I) FSK Caller ID Timeout
• Auto-Answer Inbound TDM Calls (Type II CPID)
3.9.4.1 Initial Wait for Inband CPID
Description: Specifies the number of milliseconds the DMG1000 will wait for the first inband
DTMF digit to arrive after answering an incoming PBX call.
Allowed Values: 100 to 10000 milliseconds
Default Value = 2000 milliseconds
INI File Parameter Name = telInbCpidStartMs
3.9.4.2 Inband CPID Complete Timeout
Description: Specifies the number of milliseconds the DMG1000 will wait for each subsequent
inband DTMF digit to arrive. If no digit is received within this time, the CPID is assumed to be
complete.
Allowed Values: 100 to 2000 milliseconds
Default Value = 300 milliseconds
INI File Parameter Name = telInbCpidEndMs