User`s guide

Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide 127
Parameter Reference
3.9.1.4 Ringing Timeout
Description: Specifies the number of milliseconds of non-ringing that will signal that an incoming
call has gone away.
Allowed Values: 100 to 10000 milliseconds
Default Value = 6000 milliseconds
INI File Parameter Name = telRingOffMs
3.9.2 Feature Code Group
The Analog parameters in the Feature Code group include:
• Transfer Feature Code
• Consult Call Dialtone Drop Code
• Consult Call Proceeding Drop Code
• Consult Call Busy Drop Code
• Consult Call Connected Drop Code
• Consult Call Disconnected Drop Code
• Consult Call Error Drop Code
3.9.2.1 Transfer Feature Code
Description: Defines the Feature Code to dial in order initiate a transfer.
Allowed Values: A string from 0 to 10 digits in length using any of the following characters: 0-9,
*, #, !
Default Value = !
Note: Each ! is a hook flash. For !, the Media Gateway will perform a single hook-flash operation. For !!,
the Media Gateway will perform a double hook-flash operation.
INI File Parameter Name = telFacTransfer