User`s guide

124 Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide
Parameter Reference
3.8.4.8 Outbound TDM Calling Party Source
Description: The source of the calling party that will be provided to the TDM interface for
outbound calls and MWI requests.
Note: When a DMG2000 is connected to a Mitel PBX and is configured for E1 QSIG, this parameter
must be set to one of the following options in conjunction with the Static TDM Calling Party
parameter:
• Outbound TDM Calling Party Source set to Static and Static TDM Calling Party set to a
number (e.g. 1234).
• Outbound TDM Calling Party Source set to VoIP and the VoIP endpoint must provide a
calling party number in the VoIP call/MWI call request.
• Outbound TDM Calling Party Source set to VoIP_Preferred and Static TDM Calling Party set
to a number (e.g. 1234).
Allowed Values:
• None = No calling party is sent.
• VoIP = Calling party is derived from the VoIP call/mwi-request.
• Static = A statically configured calling party is used.
• VoIP_Preferred = Calling party is derived from the VoIP call/mwi-request. If not available
from VoIP, then the statically configured calling party is used.
Default Value = Static
INI File Parameter Name = gwTdmOutboundCallingPartySrc
3.8.4.9 Static TDM Calling Party
Description: Specifies the calling party that will be provided to the TDM interface if Outbound
TDM Calling Party Source is set to Static or VoIP_Preferred.
Note: When a DMG2000 is connected to a Mitel PBX and is configured for E1 QSIG, this parameter
must be set to one of the following options in conjunction with the Outbound TDM Calling Party
Source parameter:
• Outbound TDM Calling Party Source set to Static and Static TDM Calling Party set to a
number (e.g. 1234).
• Outbound TDM Calling Party Source set to VoIP and the VoIP endpoint must provide a
calling party number in the VoIP call/MWI call request.
• Outbound TDM Calling Party Source set to VoIP_Preferred and Static TDM Calling Party set
to a number (e.g. 1234).
Allowed Values: Any valid dialable number
Default Value = 1234
INI File Parameter Name = gwTdmOutboundCallingParty