User`s guide

116 Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide
Parameter Reference
3.8.2.17 Use Same Port for MWI Clear/Set
Description: Specifies if the PBX requires that the telephony station that set an MWI be used to
clear the MWI.
Note: Some PBX types require that the port that set an MWI be the same port that clears the MWI.
Allowed Values:
• Yes = Use the same port to set and clear the MWI.
• No = Not necessary to use the same port to clear an MWI that was used to set the MWI.
Default Value = Yes
INI File Parameter Name = telMwiSamePort
3.8.2.18 Initial Wait for Inband CPID
Description: Specifies the number of milliseconds the DMG2000 will wait for the first inband
DTMF digit to arrive after answering an incoming PBX call.
Allowed Values: 100 to 10000 milliseconds
Default Value = 2000 milliseconds
INI File Parameter Name = telInbCpidStartMs
3.8.2.19 Inband CPID Complete Timeout
Description: Specifies the number of milliseconds the DMG2000 will wait for each subsequent
inband DTMF digit to arrive. If no digit is received within this time, the CPID is assumed to be
complete.
Allowed Values: 100 to 2000 milliseconds
Default Value = 300 milliseconds
INI File Parameter Name = telInbCpidEndMs