User`s guide

Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide 115
Parameter Reference
3.8.2.14 Consult Call Disconnected Drop Code
Description: Defines the Feature Code to dial in order to drop a Consult call that is in the
Disconnected state and to reconnect to the original call.
Allowed Values: A string from 0 to 10 digits in length using any of the following characters: 0-9,
*, #, !
Default Value = !!
Note: Each ! is a hook flash. For !, the Media Gateway will perform a single hook-flash operation. For !!,
the Media Gateway will perform a double hook-flash operation.
INI File Parameter Name = telFacCDropDis
3.8.2.15 Consult Call Error Drop Code
Description: Defines the Feature Code to dial in order to drop a Consult call that is in the Error
state and to reconnect to the original call.
Allowed Values: Dialable number, including '!' for flash hook and 'p' for pause.
Default Value = !!
Note: Each ! is a hook flash. For !, the Media Gateway will perform a single hook-flash operation. For !!,
the Media Gateway will perform a double hook-flash operation.
INI File Parameter Name = telFacCDropError
3.8.2.16 MWI Confirmation Tone
Description: Specifies whether or not the PBX sends a confirmation tone to signal the successful
completion of a Message Waiting Indication (MWI) request.
Allowed Values:
• Yes = PBX will send a confirmation tone.
• No = PBX will not send a confirmation tone.
Default Value = No
INI File Parameter Name = telMwiConfirm