User`s guide

Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide 113
Parameter Reference
INI File Parameter Name = msRingCycleTime
3.8.2.8 Enable Glare Detection
Description: When making an outbound call on the TDM network, it specifies whether the
gateway will treat the failure to detect Dialtone as a Glare Condition. A Glare condition is when an
incoming call arrives at the same time a port goes off hook to dial.
Allowed Values:
• Yes = The failure to detect dialtone will be treated as a Glare.
• No = The outbound call will proceed.
Default Value = Yes
INI File Parameter Name = telGlareDetectEnable
3.8.2.9 Transfer Feature Code
Description: Defines the Feature Code to dial in order initiate a transfer.
Allowed Values: A string from 0 to 10 digits in length using any of the following characters: 0-9,
*, #, !
Default Value = !
Note: Each ! is a hook flash. For !, the Media Gateway will perform a single hook-flash operation. For !!,
the Media Gateway will perform a double hook-flash operation.
INI File Parameter Name = telFacTransfer
3.8.2.10 Consult Call Dialtone Drop Code
Description: Defines the Feature Code to dial in order to drop a Consult call that is in the Dialtone
state and to reconnect to the original call.
Allowed Values: A string from 0 to 10 digits in length using any of the following characters: 0-9,
*, #, !
Default Value = !!
Note: Each ! is a hook flash. For !, the Media Gateway will perform a single hook-flash operation. For !!,
the Media Gateway will perform a double hook-flash operation.
INI File Parameter Name = telFacCDropDt