User`s guide

106 Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide
Parameter Reference
Maximum Call Party Delay (Phone Emulating Only)
Description: Specifies the maximum number of milliseconds that the Media Gateway will wait for
display information (calling party information) on an inbound PBX call before the call is routed to
the IP destination. (0 for no delay)
Allowed Values: 0 through 10000 milliseconds
Default Value = 2000 milliseconds
INI File Parameter Name = telCallInfoTout
Dial Digit On Time
Description: Specifies the duration in milliseconds of a dialed DTMF digit to the PBX.
Allowed Values: 30 through 2000 milliseconds
Default Value = 100 milliseconds
INI File Parameter Name = telDialDigitOnMs
Dial Inter-Digit Time
Description: Specifies the delay in milliseconds between dialed DTMF digits to the PBX.
Allowed Values: 30 through 2000 milliseconds
Default Value = 100 milliseconds
INI File Parameter Name = telDialInterDigitMs
Dial Pause Time
Description: Specifies the delay in milliseconds for each pause (,) character encountered in a dial
string.
Allowed Values: 40 through 10000 milliseconds
Default Value = 2000 milliseconds
INI File Parameter Name = telDialPauseMs