Product information guide

Network Interface Controller (NIC Indicator) Codes
Page 9
Network Interface Controller (NIC Indicator) Codes
The following illustration shows the location of the NIC indicators:
The NIC indicators light up as follows to show NIC conditions:
Power Indicator Codes
Each power supply on the DMG4000 Gateways has an indicator that shows whether power is present or whether
a power fault has occurred. The following illustration shows where the power supply status indicator is located
(marked by a 1):
Number Description
1 Link indicator
2 Activity indicator
Indicator Condition
Link and activity indicators are off. The NIC is not connected to the network.
Link indicator is green. The NIC is connected to a valid network link at 1000 Mbps.
Link indicator is amber. The NIC is connected to a valid network link at 10/100 Mbps.
Activity indicator is green and blinking. Network data is being sent or received.