Datasheet

Dialogic

Diva

V-xPRI Media Boards

Datasheet

Diva Media Boards

Quick Reference

Voice resources All channels

Fax resources (Fax) All channels via Fax licenses (V.34 speeds are only possible on part of the channels when using the Diva

V-4PRI/E1/T1-120 HS or the Diva V-8PRI/E1/T1-240 FS, because these boards have only 3 DSPs per trunk.)

Conferencing resources All channels

Max. boards/system 4 (QA tested by Dialogic); more than 4 are possible — depends on the application and the performance of

the server hardware

CSP Yes

Form factor PCI: Full Size; PCIe: Half Size (1, 2, 4 trunks)/Full Size (4, 8 trunks)

Resource bus PCI: Rev 2.2 up to 66 MHz; PCIe Half Size 1.0a x1 lane (3.3/12 V); PCIe Full Size 1.0a x4 lane (3.3/12 V)

Connection PCI: 2 or 4 RJ-45 connectors; PCIe: 4 RJ-45 connectors

Network interface E1/T1/J1 and ISDN PRI (Primary Rate Interface) in TE and NT Mode

Signaling ETSI, NI-1, 4ESS, 5ESS, and all major ISDN protocols; QSIG; and many more

Operating system Windows

and Linux. Details at www.dialogic.com/systemreleases

Volts 3.3 and 5

Required accessories 1, 2, 4, or 8 shielded RJ-45/RJ-45 cables; V-8PRI requires 4 RJ45 Y-Cables

Hardware

• 64-bit RISC CPU, 466 MHz, 1070 MIPS with 64 MB SDRAM

• 16/32-bit DSPs, 600 MHz, 1200 MIPS with 32 MB SDRAM per installed DSP

• PCI: 10 DSPs (Diva V-2PRI) or 20 DSPs (Diva V-4PRI)

• PCIe (Half Size): 12 DSPs (Diva V-1PRI, Diva V-2PRI, Diva V-4PRI)

• PCIe (Full Size): 24 DSPs (Diva V-4PRI, Diva V-8PRI)

• 384, 448, 704, or 896 MB onboard SDRAM

• Physical dimensions:

— PCI: 312.00 mm x 106.68 mm (PCB)

— PCI: 352.17 mm x 126.37 mm (including bracket and retainer)

— PCIe: 167.65 mm x 111.15 mm (PCB)

— PCIe: 180.96 mm x 126.31 mm (including bracket and retainer)

— PCIe: 352.17 mm x 126.31 mm (including bracket and retainer)

• High-impedance mode for passive monitoring (“line tapping via HiZ mode”)

• I/O addresses, memory, and interrupt allocated automatically

• Plug-and-play interface

• PCI 2.2, up to 66 MHz, 32 bit (also supports 64 bit dual address cycle DMA), 3.3 V and 5 V supply required, 3.3 V, or 5 V universal signaling,

supported in backwards compatible PCI-X slots

• Production quality: ISO 9002

Technical Speciﬁcations