Datasheet

ManualsBrandsDialogic ManualsNetworking306-358

PBXs Interoperability

Any PBX that follows one of the protocol speciﬁcations listed in the Technical Speciﬁcations section will interoperate

with the DMG2000 Gateways. The following is a list of PBXs that were speciﬁcally tested either in a Dialogic, or a third

party, interoperability lab.

Manufacturer Models Software Version

Supplemental Service Support

Call Party ID Transfer MWI

Avaya DEFINITY G3 Version 3 or greater Yes Yes Yes

S8500 Communications Manager SW V2.0 Yes Yes Yes

or greater

NEC 2400 IMX Release 5200 Dec. 92 1b or greater Yes

Yes Yes

Nortel Meridian 1— Release 15 or greater and options No No No

Option 11c 19 and 46 are required

Siemens Hicom 300E CS Release 9006.4 or greater Yes

Yes Yes

(North American software load only)

For explanation of notes, see Table 7.

Table 1. PBX Support — CAS

Datasheet Dialogic

2000 Media Gateway Series

Basic Call Control Supplemental Service Support

Diversion Call Transfer

Path

MWI

Replace-

Manu- Models Software Version

Inbound Outbound CPID

ment

facturer

Forward

Join Re-Route

Route

ID and Redirect

(Hairpin) (TBCT)

Optimi-

Reason zation

Alcatel OmniPCX 4400 Version 3.2.712.5 Yes Yes Yes Yes No Yes N/A Yes N/A

Avaya S8500 Communications Manager Yes Yes Yes Yes No Yes N/A Yes Yes

SW V2.0

Mitel SX-2000 S, LW 34 Yes Yes Yes Yes No Yes N/A Yes Yes

SX-2000 VS

3300 Version 5.1.4.8 Yes Yes Yes Yes No Yes N/A Yes Yes

NEC 2400 IPX R17 Release 03.46.001 Yes Yes Yes Yes No Yes Yes Yes Yes

Nortel Meridian 1 — Release 15 or greater and Yes Yes Yes Yes No Yes

N/A Yes Yes

Option 11c options 19 and 46 are

required

Communications Version 2121, Release 4, Yes Yes Yes Yes No Yes

N/A Yes Yes

Server 1000 Issue 00 T

Siemens HiPath 4000 V2 SMR 9 SMPO Yes Yes Yes Yes No Yes

N/A Yes Yes

For explanation of notes, see Table 7.

Table 2. PBX Support — T1 QSIG