User's Manual

Table Of Contents

SC14CVMDECT SF Cordless Voice Module

3.9 GENERAL FEATURES

Standard FP audio control feature.

Note 6: These features can be supported by combined API commands in user software.

Table 4: Supported general features

Functionality (Note 6)

support

Remark

Call handling

Conferencing - Yes Call between FP and 4x PP

Intercom Yes Yes Call between FP and 4x PP

Walkie Talkie mode Yes - Call between PP and PP without FP

Baby monitor Yes - Voice Activated PP. See document reference [2]

Voice over PCM interface Yes Yes -law (64 kbit/s), A-law (64 kbit/s), G.726 ADPCM

(32 kbit/s), G.722 ADPCM (64 kbit/s), Linear (128 kbit/s)

Call transfer Yes Yes Transfer call between PPs on FP

Page call Yes Yes FP pages all PPs (PP locator)

Protocol

Manual registration Yes Yes

Number of registered PPs per FP Yes - 1 to 6

Audio and tone

Microphone mute Yes Yes

Tone generation Yes No Melody generator with 7 polyphonic tones

Audio Volume control Yes Yes

Tone Volume control Yes No

Headset support Yes Yes

Handsfree/Speakerphone Yes No

General

Real time clock Yes Yes Accuracy depending directly on crystal

Real time clock synchronization Yes Yes All PP clocks are kept in synchronization with the FP

SW EEPROM (VES) Storage Yes Yes Internal on module

Battery Charge Management Yes No

PSTN line interface support - No PSTN software on request

I/O port support Yes Yes

Port Interrupt support No No

Automatic headset detection Yes No

Low speed data Yes Yes 1.6 kbit/s

LU10 data channel Yes Yes 54 kbit/s

CAT-iq up to version 2.0, 3.0 Yes Yes

ULE applications - Yes Number of ULE subscriptions: up to 180.