User's Manual

Table Of Contents
SC14CVMDECT SF Cordless Voice Module
© 2012 Dialog Semiconductor B.V. 11 July 1, 2014 v1.6
3.4 PORTABLE PART CONFIGURATION
A Portable Part configuration with SC14CVMDECT SF
requires additional external parts as shown in Figure 3.
.
Table 2 provides an overview of the supported inter-
faces for a portable part.
Note 4: AFE setting is configurable, refer to document [2].
3.5 FIXED PART CONFIGURATION
A Fixed Part configuration with SC14CVMDECT SF
requires additional external parts as shown in Figure 4.
Figure 3 PP configuration
SC14CVMDECT
Loudspeaker
MIC (handset)
Earpiece (handset)
MCU
Headset
UART
Ports
PCM
Table 2: PP support overview
Item Supported Remark
Battery management Yes Supported by API
Keypad No On external MCU
Display No On external MCU
IO Ports Yes All digital IO port pins can be controlled by API
PCM interface Yes 1x 16 bits serial I/O, PCM_FSC 8 kHz/16 kHz
UART Yes 115.2 kbit/s, used for API-commands
Headset detection Yes Supported by API
LSR (Earpiece, headset) Yes Connected to LSRp and/or LSRn
supports single-end and differential (Note 4)
MIC (Earpiece, headset,
handsfree)
Yes Connected to MICp and/or MICn and/or MICh
supports single-ended and differential (Note 4)
Handsfree speaker Yes Connected to PAOUTp/n (Note 4)
Radio Yes Integrated single antenna and support for external antenna(s)