User's Manual
Table Of Contents
- 1.0 Connection Diagram
- 2.0 Introduction
- 3.0 Cordless Voice Module functionality
- 4.0 Functional description
- 5.0 CAT-iq
- 6.0 Specifications
- 7.0 Design guidelines
- 8.0 Audio Level Adjustment
- 9.0 Example Application Diagram
- 10.0 Mechanical Dimensions
- 11.0 Module integration
- 12.0 UTAM membership waiver
- 13.0 Soldering
- 14.0 Notices to OEM
SC14CVMDECT Cordless Voice Module
© 2011 SiTel Semiconductor B.V. Company Confidential 21 August 19, 2011 v1.2.1
be read locally from the MMI Software.
To adjust the clock in the base station, a service
connection can be setup which can be set by
commands from the PP.
The clock can also be read and set directly from an
external microprocessor or through the MMI software
on the FP base.
The real-time clock accuracy depends directly on the
SC14CVMDECT crystal.
When the SC14CVMDECT is configured as a PP, the
clock has the same accuracy as the FP clock. But,
when the PP synchronises with a FP, the PP crystal is
synchronized with the FP crystal and the PP clock will
change accordingly.
The accuracy is expected to be within 1 minute for up
to 6 weeks without being locked to a FP.
Figure 12 Clock synchronization