User's Manual
Table Of Contents
- 1.0 Connection Diagram
- 2.0 Introduction
- 3.0 Cordless Voice Module functionality
- 4.0 Functional description
- 5.0 CAT-iq
- 6.0 Specifications
- 7.0 Design guidelines
- 8.0 Audio Level Adjustment
- 9.0 Example Application Diagram
- 10.0 Mechanical Dimensions
- 11.0 Module integration
- 12.0 UTAM membership waiver
- 13.0 Soldering
- 14.0 Notices to OEM
SC14CVMDECT Cordless Voice Module
© 2011 SiTel Semiconductor B.V. Company Confidential 15 August 19, 2011 v1.2.1
3.7 FUNCTIONAL OVERVIEW
Table 5: Functional overview
Functionality
Sup-
ported
Remark
Standard FP audio control feature: Call handling
PP to FP, FP to PP Yes
Intercom No PP to FP, FP to PP
Conference call No
Call forwarding No Transfer call between PPs not possible.
Page call Yes FP pages all PPs (PP locator)
Protocol
Manual registration Yes
Number of registered PPs per FP Yes 1 to 6
Low rate data transfer Yes 1.6 Kbit/s on the air-interface (30 bytes payload)
Audio and tone
Microphone mute Yes PP only. Mute of MIC in all audio connections are possible
Tone generation Yes Melody generator with 7 polyphonic tones
Audio Volume control Yes 6 steps are adjustable by EEPROM
Tone Volume control Yes 6 steps are adjustable by EEPROM
Headset support Yes
Handsfree/Speakerphone Yes PP only
General
Real time clock Yes Accuracy depending directly on crystal
Real time clock synchronization Yes All PP clocks are kept in synchronization with the FP
SW EEPROM Storage Yes Internal on Module
Battery Charge Management No
PSTN line interface support No PSTN software on Request
I/O port support Yes 4 pins I/O
Port Interrupt support No