Data Sheet

DA14531MOD
SmartBond TINY
TM
Module
Error! Unknown document
property name.
Datasheet
CFR0011-120-00
4 of 4
© 2020
1.8 Information on test modes and additional testing requirements:
When testing host product, the host manufacture should follow FCC KDB Publication 996369 D04 Module
Integration Guide for testing the host products. The host manufacturer may operate their product during
the measurements. In setting up the configurations, if the pairing and call box options for testing does not
work, then the host product manufacturer should coordinate with the module manufacturer for access to
test mode software. For wireless LAN, the product under test is set into a link/association with a
partnering WLAN device, as per the normal intended use of the product. To ease testing, the product
under test is set to transmit at a high duty cycle, such as by sending a file or streaming some media
content. Alternatively, a Wi-Fi test set may be used. Simultaneously transmitting modules installed in the
host should be all active.
1.9 Additional testing, Part 15 Subpart B disclaimer:
The modular transmitter is only FCC authorized for the specific rule parts (FCC Part 15.247) list on the
grant, and that the host product manufacturer is responsible for compliance to any other FCC rules that
apply to the host not covered by the modular transmitter grant of certification. The final host product still
requires Part 15 Subpart B compliance testing with the modular transmitter installed when contains
digital circuity.