Manual

Dialight – LED Solutions for Industrial and Hazardous Applications
Tel: [phone] – Fax: [phone] – www.dialight.com
WARNING: LUMINAIRE MUST BE EARTHED
7. Check all connections are correct and there are no loose or un-terminated cables, replace LED tray ensuring that no cables
or that the drop cord is trapped, DO NOT OVERTIGHTEN. When complete re-connect the power supply and test for
operation.
IMPORTANT NOTE TO THE INSTALLER
THESE INSTRUCTIONS CONTAIN IMPORTANT SAFETY INFORMATION, PLEASE ENSURE THAT A COPY IS MADE
AVAILABLE TO THE USER AND/OR MAINTENANACE ENGINEER OF THESE PRODUCTS.
Specification:- Tightening torques:-
Supply Voltage 100-277VAC 50-60Hz Front assembly to body 2.0Nm / 18.0 in lb
Supply Current 100mA @ 230VAC / 200mA @ 100VAC Bracket to body 8.0Nm / 71.0 in lb
Operating Temperature Range -40°C to +60°C
Input Terminal Block Capacity 0.5
2
– 4mm
2
/ 18-14 AWG Additional cable gland if required M20 x 1.5
Weight 4.5Kg / 10.0 lbs (to IP 66 rating)
Maximum loop current 16A
Rated fuse/circuit breaker Consult MCB manufacturer
Fig.1
Fig. 2
Fig. 3
Fig. 5
Fig. 4
Multiple Fixture Connection Example
Fig. 6
Mains Input Connection
Mains Input Connection