Datasheet

29
Linking Cables & Blocks
RJ45 Cables & Blocks
RJ45 cables are used to transmit control signals
between RFCC master & slave ColorDrivers and
also to drive HL16RGB modules. Cables are
available to convert the molex output from the
ColorDriver to an RJ45 format, from the RJ45
format to the HL16RGB input, & from a DMX
signal to RJ45.
CDL-M3M 3 meter Molex male to male
RJ45-XLRF Female DMX to RJ45 converter
RJ45-XLRM Male DMX to RJ45 converter
RJ45-MLXF Male Molex to RJ45 female
RJ45-MLXM Male Molex to RJ45 male
RJ45-CON-ASSY RJ45 to HL16RGB
connector block
RJ45-C Termination plug for last
RJ45-CONN-ASSY block
RJ45-05 RJ45 to RJ45 cable, 0.5 meters
RJ45-2 RJ45 to RJ45 cable, 2.0 meters
RJ45-5 RJ45 to RJ45 cable, 5.0 meters
Molex Cables & Splitters
Molex cables are used to connect from the
Dialight Lumidrives ColorDrivers to the various
RGB Color engines & RGB Linkleds. A range of
splitter blocks is available for driving multiple
Color Engines from a single Color Driver.
CDL-M3M 3 meter Molex male to male
CDL-M3E 3 meter Molex male to wires for
circular ColorEngines
CDJB3 3 way Molex splitter
(female receptacles in & out)
CDJB7 7 way Molex splitter
(female receptacles in & out)
CDJB-BL End plug for Molex splitters
CT2 Linking Cables
The CT2 linking cables are the interlink
connection cables for the LumiDrives LinkLED™
range of LED lighting products & any other light
engines equipped with CT2 “Quick Connects”.
These cables are pre-connected with a 2 way
plug to match the socket used on the LinkLED™.
The range includes both interconnecting cables
and end connector.
CT2-E300 2-way input lead
CT2-100 2-way link lead 100 mm
CT2-200 2-way link lead 200 mm
CT2-1000 2-way link lead 1000 mm
CT2-C 2-way common connector
CT4 Linking Cables
The CT4 linking cables are the interlink
connection cables for the LumiDrives RGB
LinkLED™ Linear ColorEngine ranges of LED
lighting products. These cables are
pre-connected with the 4 way plug to match the
socket used on the LinkLED™. The range
includes both interconnecting cables and end
connector.
CT4-MLFM 4-way connection to
Molex Male
CT4-MLFX 4-way connection to
Molex Female
CT4-100 4-way link lead 100 mm
CT4-200 4-way link lead 200 mm
CT4-C 4-way common connector
CDL-M3M 8-way Molex – male to male
Powerwhite Linking Cables
LML6-CON-CAB Entry cable, driver to 1st
module
LML6-TER-CAB End plug (required)
LML6-LV-CON-CAB Entry cable, driver to 1st
module (For LV modules)
LML6-LV-M2M-CAB Connection cable
(module to module)
(For LV modules)
CT8 Linking Cables
CT8-1.25-100 8-way link lead 100mm
CT8-1.25-200 8-way link lead 200mm
CT8-CK 8-way end connector
CT8-1.25-3E 8-way link lead to wire ends (3m)