INSTALLATION AND MAINTENANCE MANUAL SAFESITE SERIES HIGH BAY Document No: 9100-127-1452-99 Rev B MARCH 2011 MODEL HBCXX6X 347-480V
Document No: 9100-127-1452-99 Rev B 1: Introduction This High Bay light is designed for illumination of industrial locations. It uses the latest in solid state lighting technology for long life, low maintenance, and high efficiency. The unique optical design focuses light downward to where it is needed, giving improved efficiency over a conventional HID luminaire.
Document No: 9100-127-1452-99 Rev B Pendent Mount Installation Steps: • • • • For maximum long term reliability and light output, the light must be installed in free air. o The High Bay fixture design incorporates an over-temperature control circuit that reduces input power should internal temperatures reach a maximum level. As a result, light output may be reduced. The High Bay fixture is threaded for 3/4” NPT in order to be assembled to conduit. o Calculate and measure required conduit length.
Document No: 9100-127-1452-99 Rev B 3: Maintenance • To avoid personal injury, disconnect power to the light and allow the unit to cool down before performing maintenance. Warning: No user serviceable parts inside of fixture. Risk of electric shock. Removal of the lens will void the warranty. 1) Perform visual, mechanical and electrical inspections on a regular basis. We recommend routine checks to be made on a yearly basis. Frequency of use and environment should determine this.
Document No: 9100-127-1452-99 Rev B 4: Specifications Nominal AC Supply Voltage 347-480VAC, 50/60Hz Power consumption 150W nominal Operating temperature range -40°F to +149°F [-40°C to +65°C] T5 @ 149°F [65°C] Power factor >0.95 ATHD <15% Dimensions (Height x Diameter) 5” x 16” [12.7cm x 40.6cm] Weight 27 lbs [10.88 kg] Intertek Certified to UL-844 and C22.2 No. 137 DIMENSIONS ARE FOR REFERENCE ONLY.
