Datasheet

DRAWING NUMBER
REV
1501 ROUTE 34 SOUTH
FARMINGDALE, NJ 07727
TITLE
MATERIAL
FSCM
FINISH:
ALL DIM'S IN: INCHES (MM)
83330
THIS DRAWING AND THE CONTENTS HEREIN ARE CONFIDENTIAL AND
THE SOLE PROPERTY OF DIALIGHT. REPRODUCTION OF THIS DRAWING
OR CONSTRUCTION OF ANY PARTS WITHIN THIS DRAWING ARE
FORBIDDEN WITHOUT THE WRITTEN CONSENT OF DIALIGHT.
.095
[2,41]
.110
[2,79]
.126
[3,2]
.087
[2,21]
.075
[1.91]
.035/.028
[0.9/0.7]
.138
[3,51]
.177
[4,5]
.102
[2.6]
.059
[1,5]
.102
[2.6]
.177
[4,5]
.059
[1,5]
SCALE: 8.000
TOLERANCES:
UNLESS OTHERWISE SPECIFIED
FRACTIONS: #1/64
DECIMALS (.XX): #.01
DECIMALS (.XXX): #.008
DECIMALS (.XXXX): #.0005
ANGLES: #1$
SHEET 1 OF 1 FAMILY TABLE:
REV ECN NO REVISIONS DRN CKD APP DATE
A NEW RELEASE
DC AM NO 1-28-02
B
REMOVED NOTE 3; NEW SOLDERING PROFILE;
REMOVED SOLDERING PROFILE FROM TABLE;
ADDED "F" TO P/Ns; ADDED RoHS COMPLIANT NOTE;
ADDED LED SCHEMATIC
AJF KLJ CJC 9-4-09
OPERATING CHARACTERISTICS AT 25$C AMBIENT
LED CHARACTERISTICS MIN. TYP. MAX. UNITS TEST CONDITIONS
LUMINOUS INTENSITY 90.0 180.0 mcd I
F = 20 mA
FORWARD VOLTAGE 3.5 4.2 V I
F = 20 mA
REVERSE CURRENT 0.01 10 A V
R = 5 V
VIEWING ANGLE (2 1/2)
120
DEGREES
COLOR COORDINATES
X 0.29 0.32 0.365
I
F = 20 mA
Y 0.22 0.31 0.42
ABSOLUTE MAXIMUM RATINGS AT 25$C AMBIENT UNITS
POWER DISSIPATION 85 mW
CONTINUOS FORWARD CURRENT 20 mA
DERATE LINEARLY FROM 75 $C 0.6 mA/$C
PEAK REVERSE VOLTAGE 5 V
OPERATING TEMPERATURE -40 TO +100 $C
STORAGE TEMPERATURE -40 TO +100 $C
NOTES:
1. EPOXY COLOR: DIFFUSED
2. DIE: InGaN.
3. SOLDER ADHERANCE: BOTH LEADS PER MIL-STD-202E, METHOD 208C.
4. SUFFIX -202F FOR 20-PCS ON A SAMPLE TAPE STRIP.
SUFFIX -207F FOR 7"(178mm) DIA. REEL, .315(8mm) EMBOSSED CARRIER TAPE,WITH 2000 PARTS/REEL.
5. PARTS TO BE TAPED AND REELED PER EIA-RS-481A.
6. PARTS TO BE SUPPLIED 2000 DEVICES PER REEL WITH ALL PARTS ON ONE REEL FROM SAME LOT AND SAME BIN CATEGORY.
7. LABELING: REELS TO BE IDENTIFIED WITH P/N, QUANTITY, DATE CODE, INTENSITY BIN CATEGORY AND COLOR BIN CATEGORY.
8. PACKAGING IN SEALED ALUMINUM MOISTURE BARRIER BAG WITH DESICCANT AND
"MOISTURE SENSITIVITY LEVEL OF "2" PER JEDEC J-STD-033.
9. ATTENTION: OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES.
10. DEVICES POSITIONED ON REEL WITH CATHODE SIDE TOWARDS SPROCKET.
11. TAPE AND REEL LEDS MAY REQUIRE RE-TAPING AFTER TWELVE MONTHS.
12. DIALIGHT P/N: 597-3901-202F, 597-3901-207F.
B
C-16903
WHITE PLCC SMT LED
RoHS COMPLIANT
.043/.020
[1.1/0.5]
.007/.005
[0.18/0.12]
.024/.016
[0.6/0.4]
.004 (TYP.)
[0.1]
CATHODE
RECOMMENDED SOLDER PAD LAYOUT
PAD LAYOUT FOR IMPROVED HEAT DISSIPATION
SOLDER RESIST
Cu-AREA > .0248 in (16mm )
2
2
PIN 2
PIN 1
RoHS COMPLIANT 597-3901-20XF
Part Numbers with the "F" suffix ending are RoHS Compliant.
For example: 597-3901-202F
Reel and bag packaging are marked with "RoHS Compliant"
label or equivalent markings. These parts can be used with
RoHS reflow profile. Parts can be wave soldered, dip soldered
or hand soldered using typical lead-free soldering process
with max 260°C temp. for 5 sec.
RECOMMENDED RoHS COMPLIANT
REFLOW PROFILE
120s MAX
100s MAX
25$C
RAMP UP
3$C/s (MAX)
MAXIMUM SOLDER PROFILE
RECOMMENDED SOLDER PROFILE
MINIMUM SOLDER PROFILE
255$C
240$C
217$C
0
50
100
150
200
250
300
s
50
0
100
150
200
250
300
$C
RAMP DOWN
6$C/s (MAX)
30s MAX
10s MIN
260$C
+0$C
-5$C
245$C#5$C
235$C
+5$C
-0$C
t
T
LED SCHEMATIC
PIN 1
CATHODE
PIN 2