Datasheet

ManualsBrandsDIALIGHT ManualsDisplaysLED component Green (L x W x H) 14.3 x 9.9 x 6.22 mm

5-5

Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com

4mm Flat Top

LED CBI

Circuit Board Indicator

Sloped Back Housing

550-6x07

5.2

[.205]

9.02 [.355]

4.10

[.162]

DIA.

5.28

[.208]

.560

[.022]

6.22

[.245]

3.00

[.118]

3.68

[.145]

6.22 [.245]

.508

[.020]

SQ.

1.09

[.043]

RECOMMENDED

P.C. BOARD LAYOUT

2.54

[.100]

2.54

[.100]

CATHODE

I.D.

PART NO. COLOR

550-6207 Green

550-6307 Yellow

550-6407 Red

Features

• Multiple CBIs form horizontal LED arrays on 6.35mm

(0.250”) center-lines.

• Flat LED provides flush panel appearance and wide

viewing angle

• High Contrast, UL 94 V-0 rated, black housing

• Oxygen index: 32%

• Polymer content: PBT, 0.596 g

• Housing stand-offs facilitate PCB cleaning

• Solderability per MIL-STD-202F, method 208F

• LEDs are safe for direct viewing per IEC 825-1, EN-60825-1

• Compatible with 552-60xx-200

Tolerance note: As noted, otherwise:

• LED Protrusion: ±0.04 mm [±0.016]

• CBI Housing: ±0.02mm[±0.008]

Dimensions in mm [inches]

Peak I

Test Viewing LED

Part Number Color Wavelength nm mcd Volts Current (mA) Angle 2

ΘΘ

Data sheet Page #

550-6207 Green 565 12.6 2.1 20 150° 521-9708 5-19

550-6307 Yellow 585 8.7 2.1 20 150° 521-9707 5-19

550-6407 Red 630 8.7 2 20 145° 521-9706 5-19

Typical Operating Characteristics

=25°C)

See LED data sheet for additional information

See Page 5-20 and 5-21 for Reference Only LED Drive Circuit Example

See Page 5-22 for Pin Out

Summary of content (2 pages)

PAGE 1
4mm Flat Top LED CBI® Circuit Board Indicator Sloped Back Housing 6.22 [.245] PART NO. 550-6207 550-6307 550-6407 9.02 [.355] CATHODE I.D. 5.28 [.208] 4.10 [.162] DIA. 6.22 [.245] 550-6x07 COLOR Green Yellow Red 3.00 [.118] 3.68 [.145] .560 [.022] .508 [.020] SQ. 2.54 [.100] 1.09 [.043] 5.2 [.205] CATHODE RECOMMENDED P.C. BOARD LAYOUT 2.54 [.100] Dimensions in mm [inches] Features • Multiple CBIs form horizontal LED arrays on 6.35mm (0.250”) center-lines.
PAGE 2
4mm Discrete LED Flat Top Tinted, Diffused 521-970x PART NO. 521-9706 521-9707 521-9708 2.54 [.100] 5.99 [.236] 1.27 [.050] CATHODE COLOR Red Yellow Green 2.54 [.100] 3.99 [.157] 1.00 [.040] .508 [.020] 26.42 [1.04] min Dimensions in mm [inches] Red Yellow Green -9706 -9707 -9708 Power Dssipation (mW) Derating (mA/°C) From 50°C 100 .4 60 .25 100 .