Datasheet

6-21
Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: [phone] • FAX: [phone] •www.dialight.com
6
To order any of the 550-3x07 part numbers with
Reverse Polarity (Green Anode Right; Yellow or
Red Anode Left), please add -010 to
the part numbers shown above.
5mm
LED CBI
®
Circuit Board Indicator
3 Leaded, Bi-Color, Common Cathode
550-3x07
2.54
[.100 ±.002]
RECOMMENDED PC BOARD
HOLE PATTERN
2.54
[.100 ±.002]
1.27
[.050 ±.002
]
Ø 1.09
[.043 ±.002]
TYP (3)
5.20
[.205]
2.54
[.100 ]
.51 SQ.
[.020] NOM.
TYP.
3.05
[.120 ±.010
]
TYP
5.00
[.197]
9.14
[.360 MAX]
5.36
[.211]
5.08
[.200 MAX]
6.10
[.240 MAX]
6.10
[
.240 MAX]
3.00
[.118]
GREEN
ANODE
RED OR
YELLOW
ANODE
COMMON
CATHODE
COMMON
CATHODE
PART NO. COLOR
550-3507 Red/Green
550-3607 Yellow/Green
Features
• Common Cathode simplifies design, and the red/green
LED provides yellow-orange as a third color
• Multiple CBIs form horizontal LED arrays on 6.35mm
(0.250”) center-lines.
• High Contrast, UL 94 V-0 rated, black housing
• Oxygen index: 32%
• Polymer content: PBT, 0.200 g
• Housing stand-offs facilitate PCB cleaning
• Solderability per MIL-STD-202F, method 208F
• LEDs are safe for direct viewing per IEC 825-1, EN-60825-1
Dimensions in mm [inches]
Peak I
V
V
F
Test Viewing LED
Part Number Color Wavelength nm mcd Volts Current (mA) Angle 2 ΘΘ
½
Data sheet Page #
550-3507 Red/Green 635/565 5/8 2.1/2.3 10 65° 521-9450 6-45
550-3607 Yellow/Green 583/565 5/8 2.1/2.1 10 65° 521-9460 6-45
Typical Operating Characteristics
(T
A
=25°C)
See LED data sheet for additional information
NEW
Standard polarity shown in drawing
See page 6-55 and 6-56 for Reference Only LED Drive Circuit Examples. See page 6-57 for Pin Out
Tolerance note: As noted, otherwise:
• LED Protrusion: ±0.04 mm [±0.016]
• CBI Housing: ±0.02mm[±0.008]
5 5 0
3 x 0 7 0 1 0
–010 Ordering Code Suffix required ONLY for Reverse Polarity Option
PART NUMBER ORDERING CODE
– –
Reverse Polarity Option
1) Green Anode Right;
Yellow or Red Anode Left