Datasheet

2-31
Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: [phone] • FAX: [phone] •www.dialight.com
2
2.5mm Round
®
Optopipe
TM
Optical Light Pipe, 8 Array
515-1062
9.70
[.38]
2.54
[.100]
DIFFUSED FRONT
SURFACES
3.81
[.150]
8.00
[.315]
6.10
[.24]
2.79
[.11]
1.65
[.065]
13.72
[.540] TYP
2 PLCS
1.27
[.050] SQ
MNTG PINS
TYP 3 PLCS
34.54
[.136]
Ø 2.49
[.098]
8 PLCS
4.57
[.180]
7 PLCS
2.21
[.087]
1.35
[.053]
TYP
2.29
[.090]
13.72 ±.08
[.540 ±.003]
TYP 2 PLCS
Ø 1.60 ±.05
[Ø .064 ±.002]
TYP 3 PLCS
1.04
[.041]
TYP
4.57
[.180]
TYP
2.69
[.106]
TYP
1.70
[.067]
TYP
4.39
[.173]
TYP
DIRECTION
OF LIGHT
RECOMMENDED SOLDER PAD/HOLES LAYOUT
(BI-COLOR PAD SHOWN)
C.L. LED
FRONT
PANEL
1.57
[.062]
Dimensions in mm [inches]
Recommended
MicroLED SMT LEDs
for use with 515-1062
PART NO. PAGE #
597-3xx1-5xx 1-30
597-77x1-5xx 1-31
Solder Pad/Holes layout shown is for bi-color
LEDs
Contact factory for single color layout
Features
• Compatible with Dialight’s 515-1063 8 Array
Light Pipe for bi-level SMT indicators
• High transmissivity polycarbonate material
• UL94V-0 compliance
• ESD protection (circuit isolation from front panel)
• Wide viewing angle
• Arrays reduce insertion costs
• Secures to PCB by press-fit
LED Data
For absolute maximum ratings and other electrical and optical
data on the recommended LEDs, refer to LED data sheets.
Dialight Optopipe Light Pipe Description
This Optopipe™ has 8 elements with a 2.5mm diameter placed on a narrow pitch. Although it is designed to be the
lower element of a bi-level array, it functions well as a single level array. An appearance similar to our 3mm bi-level 553
Series, arrays can be achieved by utilizing the 515-1063 for the upper level array. Three press-fit pins securely hold it in
place. The SMT LEDs are mounted in a straight line under the rear of the part on an 0.180" pitch. The light pipe material is
water clear transmissive polycarbonate rated UL94-V0, and has a 35% oxygen index.
Dialight can provide custom Optopipe™ solutions for your applications.
Operating/Storage Temperature
–30°C to +100°C
NOTE: designed for
post-reflow
PC board insertion.
NEW