Datasheet

2-47
Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: [phone] • FAX: [phone] •www.dialight.com
2
5.8mm Round
®
Optopipe
TM
Optical Light Pipe, Single
515-1038
11.68
[.460]
RECOMMENDED SOLDER PAD/HOLES LAYOUT
5.84
[.230]
Ø 5.84
[.230]
10.92
[.430]
8.13
[.320]
5.3
[.21]
2.54
[.100]
4.39
[.173]
8.79
[.346]
Ø 2.95
[.116] MOUNTING
PINS; (2) PLACES
.76
[.030]
1.09
[.043]
TYP
.41
[.016]
TYP
1.50
[.059]
TYP
1.50
[.059]
TYP
[Ø .113
±
.002]
TYP; 2 PLCS
CURVED &
DIFFUSED FRONT
SURFACE
FRONT PANEL
22.35
[.880]
3.81
[.150]
7.62
[.300]
25.40
[1.00]
18.54
[.730]
DIRECTION
OF LIGHT
8.79
±
.08
[.346
±
.003]
Dimensions in mm [inches]
MicroLED SMT LEDs
for use with 515-1038
PART NO. PAGE #
Recommended
597-3xx1-2xx 1-21
597-77x1-2xx 1-23 & 1-24
Alternatives
597-3xx1-1xx 1-19
597-3xx1-4xx 1-28
597-3xx1-5xx 1-30
597-77x1-1xx 1-20
597-77x1-5xx 1-31
LED alternatives may not produce optimum light
output
Solder Pad/Holes layout shown is for bi-color
LEDs listed under “Recommended” category
Contact factory for other layouts
Features
• High transmissivity polycarbonate material
• UL94V-0 compliance
• ESD protection (circuit isolation from front panel)
• Wide viewing angle
• Secures to PCB by press-fit
LED Data
For absolute maximum ratings and other electrical and optical
data on the recommended LEDs, refer to LED data sheets.
Dialight Optopipe Light Pipe Description
This Optopipe™ is a shorter version of 515-1039. The light pipe material is water clear transmissive polycarbonate
rated UL94-V0, and has a 35% oxygen index.
Dialight can provide custom Optopipe™ solutions for your applications.
Operating/Storage Temperature
–30°C to +100°C
NOTE: designed for
post-reflow
PC board insertion.
NEW