Datasheet

2-11
Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: [phone] • FAX: [phone] •www.dialight.com
2
1.1mm Round
®
Optopipe
TM
Optical Light Pipe, Panel Mount
515-1027
5.54
[.217]
8.26
[.325]
.80
[.031]
DIFFUSED
FRONT
SURFACE
Ø 1.68
Ø 2.26
Ø 1.83
RIBS:
(3) PLACES
120
°
APART
DIRECTION OF
LIGHT
.51 MAX
[.02]
TOP SURFACE LED
Ø [.089
]
Ø [.066]
Ø [.072]
Dimensions in mm [inches]
Alternative
MicroLED SMT LEDs
for use with 515-1027
PART NO. PAGE #
597-2xx1-4xx 1-29
597-2x01-2xx 1-25
LED alternatives may not produce optimum
light output
Features
• High transmissivity polycarbonate material
• UL94V-0 compliance
• ESD protection (circuit isolation from front panel)
• Arrays reduce insertion costs
• Designed to replace 5mm right angle through-hole device
• Secures to Panel by press-fit
LED Data
For absolute maximum ratings and other electrical and optical
data on the recommended LEDs, refer to LED data sheets.
Dialight Optopipe Light Pipe Description
This Optopipe’s™ light emitting surface appears bright and uniformly luminous. It is reliably held in the panel by 3
press-fit splines. This Optopipe™ functions as a through-the-case indicator with a textured finish on its light-emitting
surface that increases its viewing angle. The light source can be any super-bright 2mm, 3mm, or 5mm LED, or one of
Dialight’s 597 Series SMT LEDs. The emitting surface of the light source should be located no more than 0.020" or 0.5mm
from the Optopipe™. The light pipe material is water clear transmissive polycarbonate rated UL94-V0, and has a 35%
oxygen index.
Dialight can provide custom Optopipe™ solutions for your applications.
Operating/Storage Temperature
–30°C to +100°C
NEW