Datasheet

2-58
Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: [phone] • FAX: [phone] •www.dialight.com
3 x 5.5mm Rectangular
®
Optopipe
TM
Optical Light Pipe, 3 Array
515-1000
21.34
[.840]
26.82
[1.056]
5.49
[.216]
10.1
6
[.400
]
6.86
[.270]
8.08
[.318]
10.67
[.420]
3.00
[.118]
3.18
[.125]
6.81
[.268]
18.26
[.719]
12.17
[.479]
16.31
[.642]
3.94
[.155]
5.33
[.210]
10.67
[.420]
1.27
[.050]
1.65
[.065]
2.41
[.095]
1.14
[.045]
RECOMMENDED SOLDER PAD/HOLES LAYOUT
2.94 [.116]
TYP;
2 PLACES
DIRECTION
OF LIGHT
Ø [.113 ± .002]
DIFFUSED
FRONT
SURFACES
Dimensions in mm [inches]
NOTE: designed for
post-reflow
PC board insertion.
Recommended
MicroLED SMT LEDs
for use with 515-1000
PART NO. COLOR PAGE #
597-3001-2xx Red 1-21
597-3111-5xx AlGaAs Red 1-30
597-3121-2xx AlGaAs Red 1-21
597-3211-2xx Orange 1-21
597-3211-5xx Orange 1-30
597-3301-2xx Green 1-21
597-3301-5xx Green 1-30
597-3401-2xx Yellow 1-21
597-3401-5xx Yellow 1-30
597-7701-2xx Red/Green 1-23
597-7701-5xx Red/Green 1-31
597-7721-2xx Yellow/Green 1-23
597-7721-5xx Yellow/Green 1-31
597-7731-2xx Red/Yellow 1-24
Features
• High transmissivity polycarbonate material
• UL94V-0 compliance
• ESD protection (circuit isolation from front panel)
• Wide viewing angle
• Arrays reduce insertion costs
• Designed to replace rectangular right angle
through-hole device
• Compatible with Dialight’s 515-1001 single position Optopipe
Light Pipe
• Secures to PCB by press fit
LED Data
For absolute maximum ratings and other
electrical and optical data on the recommended
LEDs, refer to LED data sheets.
Operating/Storage Temperature
–30°C to +100°C
Dialight Optopipe Light Pipe Description
This Optopipe™ is reliably held in place by 2 locating pins located between the light pipe elements. This Optopipe™
functions as a through-the-case indicator, and has a textured finish on the light emitting surface that increases its viewing
angle. The recommended light sources are Dialight's 597 Series PLCC-2 or PLCC-4 Type SMT LEDs. The SMT LEDs
are mounted in a straight line on a 0.420" pitch. The light pipe material is water clear transmissive polycarbonate rated
UL94-V0, and has a 35% oxygen index.
Dialight can provide custom Optopipe™ solutions for your applications.