User`s manual

USER'S MANUAL 5750210
Revision B Section G, Page 11
Message with Pallet Count and Item Count G6-2
8. Press SLASH.
9. Press COUNT.
10. Move the cursor to the initial brace to confirm that the code in the
message is the Item Count code.
10. Press ENTER to complete the message
11. Press 1 to save the message.
12. Press PRINT and then 1 to print this message
13. Press ENTER and the LCD will show the next count in the
sequence of pallets. Press 2 to change the pallet count
14. The LCD will prompt for a different pallet count. Move the cursor
to the right and type 2.
15. Press ENTER and the LCD will prompt for the box number on
the pallet. Press 2 to change.
Editing…
APPLES {1}/<
Editing…
APPLES {1}/{0000001}<
1-Save
:APPLES
2-Cancel Changes:A↓
1-New Message
2-Edit Message
COUNT 1,2,3
APPLES {1}/{0000001}<
Name
:APPLES
APPLES {1}/{0000001}<
Pallet Count=0000001
1-OK 2-Change :_
2
Pallet Count
0000002
2
Box # 1 of 12
1-OK 2-Change :1
2