User`s manual

USER'S MANUAL 5750210
Revision B Section F, Page 12
Using a Password F9-3
Changing a Password
NOTE: You can change the password when password protection is disabled. If you do, record the new
password where you can find it easily because when the time comes to enable password protection, the
I.V./700 will no longer accept DIAGRAPH as the password.
Changing When Protection is Disabled
1 Press SET-UP.
2 Press H to access the Password
menu.
3 Press 3 to select “Change
Password".
4 The LCD will respond with "Old
Password" and a blank line. Type
the current password and press
ENTER. If correct, the screen will
respond with "Old Password, OK"
and request "New Password."
5 Type a new password. Note that no scrolled characters, numbers or punctuation marks will be
accepted.
6 Press ENTER. The LCD will prompt "Confirm Password."
7 Type your new password exactly as you typed it before and press ENTER. If you vary your
spelling, the LCD will respond "New Password" and you must redefine the new password. When
you have entered your password successfully two times, the screen will return to the password
menu.
Password
1-Password Enable
Password
3-Change
1
2
3
6