User`s manual

USER'S MANUAL 5750210
Revision B Section F, Page 10
Using a Password F9-1
The I.V./700 can operate with password protection and lock out all functions except printing, purging
and access to information.
When password protected, the screen will report "Invalid Password" whenever it receives an incorrect
password. If you make a mistake during password entry, press ENTER and wait. The screen will
refuse your entry, report "Invalid", wait 3 seconds and give you another chance. It will repeat this cycle
until it receives the active password.
Valid passwords contain only alphabetic characters. Passwords CANNOT CONTAIN numbers,
punctuation marks, icon key entries or scrolled (alternate) characters.
Accessing the Password Feature
1 Press SET-UP.
2 Press H. The Password menu offers three choices: 1. Enable; 2. Disable; and 3. Change.
Enabling Password Protection
1 Press 1. The LCD will prompt
"PASSWORD" and show a blank
second line.
2 To enable password protection for
the first time, type DIAGRAPH and
press ENTER.
If you type DIAGRAPH correctly, the
screen will respond with "OK." Your
printer is now protected and will
allow access only to Information,
Print and Purge. All other functions
now require password entry.
Password
2-Password Disable
Password
1-Password Enable
Password
3-Change
Password
_ _ _ _ _ _ _ _ _ _ _ _ _ _
Password
* * * * * * * * _ _ _ _ _ _ _ _