User`s manual

USER'S MANUAL 5750210
Revision B Section F, Page 8
Setting the Print Speed F7
The I.V./700 has the ability to print at a fixed speed while using the photosensors only to detect the
arrival of a product, not to track the direction and speed of the product. Since the motion detection is
off, fixed speed printing requires a fixed direction. Be sure to follow the directions on instruction page F8
to set the print direction. If the direction is not fixed, it is possible that your message will be unreadable.
1 Press SET-UP.
2 Press E for “E-Print Speed.” The
LCD will prompt for a Yes or No to
fixed speed printing.
If you select “1-No”, the display will
return to the Set-Up menu. If you
select “2-Yes”, the LCD will ask for
the speed in feet or meters per
minute.
3 Type the speed and press ENTER.
Follow the directions instructions on
page F8 to set the print direction.
Fixed Speed (Y/N):
1-No 2-Yes :2
Print Speed:
040.0 ft/min