User`s manual

USER'S MANUAL 5750210
Revision B Section F, Page 7
Setting the Box Length F6
The I.V./700 has the ability to ignore photosensor signals after detecting the box. This feature is useful
when you observe the I.V./700 printing between boxes or more than once per box. Setting an accurate
box length will prevent unwanted prints. Do not set the box length to be longer than the length of the
product: you can miss printing on the next box if it is following too closely.
1 Press SET-UP.
2 Press C for “C-Box Length.” The
display will prompt for distance.
3 Type in the box length in inches or
centimeters
Box Length:
000.2 inches