User`s manual

USER'S MANUAL 5750210
Revision B Section E, Page 4
Placing the Time in a Message E3
You must be in the edit mode to place the time in a message or change the format of the time. See
Instruction A2, “Creating a Text Message” to enter the edit mode.
1 While editing, position the cursor
where you want the time to appear.
2 Press TIME. The LCD will show the
time enclosed by braces. The
braces appear only on-screen, not in
the printed message.
3 Position the cursor under the initial
brace of the message time. The first
line of the LCD will now show the
format of the message time in an
abbreviated form.
4 To change the time format,
use the UP and DOWN
ARROWS.
The chart below shows all the available time formats on the I.V./700 with examples for 11:44 AM.
All prompts with “hh” in them will display and print as a twenty-four hour clock.
Time in Message Format Prompt Explanation
{11:44} hh:mm Hours and minutes, 2 digits each separated by a colon.
{1} 1:AM/2:PM 1 = before 12 noon. 2 = after 12 noon.
{AM} AM/PM AM for before 12 noon. PM for after 12 noon.
{44} mm Minutes only in 2 digits.
{11} hh The hour only in 2 digits.
{11:44AM} hh:mmAM/PM Hours and minutes with AM or PM appended.
{1144} hhmm Hours and minutes with no separation.
5 Press ENTER when done.
This feature is a part of sample message g5
hh:mm
{11:44} SHIPMENT