User`s manual

USER'S MANUAL 5750210
Revision B Section D, 5
Setting the Work Shifts D4
This function enables you to divide the workday into shifts and assign a start time and a name to each shift.
1 Press SET-UP.
2 Press 4 for “4-Work Shifts.” The LCD will
prompt “Set Shifts (1-6).”
3 Type the number of a shift to define and
press ENTER.
4 The LCD will prompt for a start time from
a 24-hour clock.
Scroll to the
starting hour and
press ENTER.
The cursor will
move to minutes.
Scroll to the starting
minutes of the hour.
Press ENTER.
5 The LCD will prompt for the name of the shift.
Type a name for the shift (1 to 19 alphanumeric characters).
This is the name that will print in your messages. The table
at right shows the default values. Note that if you use less
than three shifts, edit shift 3 by deleting the name “C.”
6 Repeat steps 2 through 5 to create additional shifts.
7 Press SET-UP to exit the work shift set-up.
Set Shifts (1-6):
Shift: 1
Start:
08:00
Shift Name:
A<
Shift
Number
Start
Time
Shift
Name
1 08:00 A
2 16:00 B
3 00:00 C
4 00:00
5 00:00
6 00:00