User`s manual

USER'S MANUAL 5750210
Revision B Section C, Page 9
Rotating the Message C8
This function will rotate the printed message 180 degrees, which enables you to print a readable message
that is upside down. Rotated messages allow you to print very close to the bottom of a box if the box is
moving upside down on the conveyor.
Setting the controller for rotated printing requires accessing a menu that is available only after a special
initialization. Start by unplugging the barrel connector from the I.V./700.
1 Press and hold ALT+INFORMATION.
2 Plug in the barrel connector.
3 Release the keys when the LCD shows
“Information”.
4 Press SET-UP.
5 Press M on the QWERTY keypad. The
LCD will prompt for a rotated message.
6 Press 2 to rotate the message.
7 Press ENTER to finish.
Information
1-Unused Messages
Rotate Message?
1-No 2-Yes :1