User`s manual

USER'S MANUAL 5750210
Revision B Section C, Page 6
Changing the Printed Dot Size C5
The I.V./700 allows you to change the diameter of all the dots that form printed characters in a range from
0.05 inch (1.27mm) to 0.10 inch (2.54mm). The default dot size is 4.
1 Press SET-UP.
2 Press DOT SIZE. The LCD will prompt
for a dot diameter:
3 Scroll to a new dot
diameter and press
ENTER.
Try sample prints with the new dot
diameter to see if you have improved the
printing. If not, change the dot size and
run more print samples.
The scanned samples following show the differences in printed characters when the dot size is 3, then 4 and
finally 7.
Dot diameter (1-9):
4
Dot Size 3 Dot Size 4 Dot Size 7