User`s manual

DIAGRAPH USER'S MANUAL 5750210
Revision B Section A, Page 8
Frequently Asked Questions A6-2
Q6 What do I do if I see no image printed on the
substrate but I see that the message has been
sent to print?
Q6a See Section H, “Troubleshooting.”
Q7 How far will the built-in photoeyes "see"?
Q7a The photosensors should be placed no farther
than one-quarter inch from the product.
Q8 What do I do if the unit is printing in the wrong
area on the case or between cases?
Q8a See Section H, “Troubleshooting.”
Q9 What do I do with the unit if I won't be using it
for a week or more?
Q9a Purge the I.V./700 with conditioner, P/N 5750-112.
See instruction page B2 for details on flushing.
Q10 Can I turn the printhead straight up and print
on the bottom of the product?
Q10a No.
Q11 Can I print upside down?
Q11a Yes. Inverted printing requires no changes in
position of the printhead or its bracket—the
controller has been programmed to print upside
down messages. Follow the directions on
instruction page C6, “Rotating the Message”.
Q12 Is the unit Year 2000 Compliant?
Q12a Yes.
Q13 What happens if I unplug the unit?
Q13a The controller memory retains your messages and
parameters.
Q14 How often should I purge?
Q14a Purge at the start of each workday or more often in
dusty environments.