Service manual

5750-212
Revision A
Page 49
L
4 1
5
1
4
2
6
of the distance from the edge of the product to
the first printed character plus the distance from
center-to-center of the photosensor and the
printhead. For example, if you wanted the
message to be printed 2 inches from the leading
edge of the product and the X dimension is 10
inches, then the indent setting is 12 inches. See
the User's Manual on setting the message indent.
Setting the controller for the external photosen-
sor requires accessing a menu that is available
only after a special initialization. DO NOT USE
THIS MENU option if you are using the standard
I.V./700 and its built-in photosensors. Start by
unplugging the I.V./700
1 Press and hold ALT and INFORMATION.
2 Plug in the barrel connector.
3 Release the keys when the LCD shows "Informa-
tion".
Information
1-Unused Messages
4 Press SET-UP.
5 Press L on the QWERTY keypad. The LCD will
prompt for an external photocell.
External Photocell?
1-No 2-Yes :1
6 Press 2 and then ENTER. The LCD will prompt
for a fixed print speed.
Print Speed:
040.0 ft/min
7 Type in a print speed and press ENTER. The LCD
will prompt for a fixed print direction.
Fixed Direction:
1:<--- 2: ---> :2
8 Select the print direction and press ENTER.