User's Manual

Meets or exceeds ASTM standards.
LCD Modes
The Diablo Wrath has a built in Anti-Chop Ball Sensor, Game Timer, Shot
Counter and can be adjusted from 4 to 20 shots per second firing rate.
Adjusting Firing Rate
1. Confirm that Barrel Blocking Device is properly installed and the
LCD says “BD 5”.
2. Press and release button.
3. “Semi 15” will appear.
4. Press and release button until desired rate of fire appears.
5. Press button to set
Sensor
1. Press button until “SENSOR” appears.
2. Press button until “OFF” or “ON” blinks.
3. Press button to set Sensor “ON” or “Off”
Counter
1. Press button until “COUNTER” appears
2. To reset press and hold button until all “0s” appear.
Timer
1. Press button until “TIMER” appears
2. To set press and arrow button until “0s” blink.
3. Press button until desired time appears (up to 99 minutes in 1 minute
increments).
4. Press button when you want to start timer count down.
Turn off marker to reset.
Auto Power
1. Press button until power appears
2. press button until “AUTO” or “ON” blinks.
3. Press button to set power to “AUTO” or “ON”.
6.
5-8-6-7.qxd 1/10/05 10:29 AM Page 3