Quick Guide

QWERTY CASE QUICK GUIDE

1. Product structure

The QwertyCase is an iPhone case. It consists of six push switches on the top and three

left and right sides, and a battery charging terminal on the center. There are a total of 30

eys on the left and right for 15 Text input

2. How to grab the qwerty case

2-1. How to hold when using Text input

Combine the QWERTY case with your iPhone and hold the iPhone's screen facing you.

Then hold the iPhone's rear camera with the charging terminal in your left hand. There

are three push switches on the top left and right sides, and hold the left and right

thumbs on each of the three push switches. The index finger of both hands is placed on

the standard position key (protrusion key) on the front keyboard. Rest your fingers on the

sides to hold the keyboard

2-2. How to Hold When Using Phone Dial

If you bring the QWERTY case closer to your left ear, you'll see 15 buttons divided into

the top and bottom. Use your right hand to grab the 15 keys on the bottom in the

horizontal direction so that there are three key buttons on the index finger, middle finger

and ring finger. 123, 456, 789, and * 0 # down from the left. At the bottom, there is a dial

button at the top and the hangup button at the bottom. The center button is not used.

3. Installing the QWERTY case application

You can install the app for free on your mobile device by searching for [qwertycase] i

he App Store on iOS.

4. Connect to Bluetooth pairing

Set Bluetooth to “On” in the iPhone Settings menu, then turn on the QWERTY case. Select

Qwertycase Text and Qwertycase Dial in the list of other devices to connect to My Device

List. Qwertycase Text and Qwertycase Dial must be paired with both devices for all

functions to work properly. If the connection failed, refer to the Bluetooth connection in

the application or homepage and try again.

PAGE 1
QWERTY CASE QUICK GUIDE 1. Product structure The QwertyCase is an iPhone case. It consists of six push switches on the top and three left and right sides, and a battery charging terminal on the center. There are a total of 30 keys on the left and right for 15 Text input 2. How to grab the qwerty case 2-1. How to hold when using Text input Combine the QWERTY case with your iPhone and hold the iPhone's screen facing you. Then hold the iPhone's rear camera with the charging terminal in your left hand.
PAGE 2
5. Using Text Input How to Grab When Using QWERTY Text Input After grasping as a guide, push the input switch to the right to enter character input mode. The six pushbuttons on the top are the Shift, Space, Command, Voiceover, Space, and Del functions. The front key consists of 15 keys on the right hand and 15 keys on the left hand, and Korean and English inputs are arranged in the same key layout as the general keyboard around the standard key (key with projection).
PAGE 3
5. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.