4020759 TM Canopy Metal Bed Twin Pink Weight Limit: 225 Lb / 102 Kg Thank you for purchasing from DHP! DO NOT RETURN TO THE STORE ! If parts are missing or damaged, we will gladly ship your replacement parts free of charge. Visit www.dhpfurniture.com/eng/support-home or call Toll-Free 1-800-267-1739 Date of Purchase Lot Number THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. E.L.
Warranty Information Read Before Beginning Assembly DHP warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect. This warranty covers one year from the date of original purchase. This is solely limited to the repair or replacement of defective parts and assembly labor is not included. This warranty does not apply to any product which has been improperly assembled, subjected to misuse or abuse or which has been altered or repaired in any way.
B34402075901 3
B A C Parts F D E Replacement Parts, Visit www.dhpfurniture.com/eng/support-home All in 1 big box! There are inner box(es) that include components required to complete this assembly. Post 01 T931700 Post 02 T931710 Post 03 T931720 Post 04 T931730 Side Rail 01 T939070 Side Rail 02 T939080 X1 X1 X1 X1 X2 X2 R Before you throw the package, please use the Check Box to identify the parts and ensure that you have all the parts needed for the assembly.
1 3 2 4 Hardware Pack 5 Hardware Pack #: T3265098-01 4.2 X 10mm X4 1/4" X 7/8" X 20 5/16" X 3/4" 1/4" X 11/16" X8 X4 4mm X1 Hardware Note: Please do not completely tighten all the hardware, until the entire assembly is complete, unless otherwise indicated in the step-by-step instructions.
Step 1 Insert (T) X 2 into (A/B) and (C/D) with BOLTS 1. Correct: Part (T) penetrating through Part (A,B,C&D). Incorrect: Part (T) NOT penetrating through Part (A,B,C&D).
Step 2 Insert (F) X 2 into (E) X 2 with BOLTS 3.
Step 3 Attach sub-assembly (E/F) from previous step to (A), (B), (C) and (D) with BOLTS 2.
Step 4 Attach (M) X 2 to (G) with BOLT 1.
E Step 5 Attach (G) to (E) X 2 with BOLTS 1.
Step 6 E 1 2 1 E O 2 Insert (O) into (E)&(F) as illustrated, then lock (O) into place with (Y).
Step 7 R Attach (R) X 4 to (A, B, C & D) with BOLT 1.
Step 8 8.1 Q S Z N Q 8.1 Insert (N X 2) into (Q X 2) and secure with SCREWS 4; 8.2 Insert POST CAP (P) X 4 onto (R), then place (Z) on top of (P) and (N or Q) on top of (Z). Align the holes and secure all the parts by screwing (S) into (R) as shown. S R N S Q P N S Z 8.
Helpful Hints Weight Limit: 225 Lb / 102 Kg Move your new furniture carefully, with two people lifting and carrying the unit to its new location. Your DHP furniture can be disassembled and reassembled to move. Some parts have been pre-assembled for this item. They are illustrated on this page and available for replacement. WARNINGS: For safety reasons and to prevent injuries: This bed is not intended for use by children under 4 years old. Prohibit jumping and horseplay on this bed.
4020759 NO LO REGRESE A LA TIENDA ! Si le faltan piezas o las que se incluyen est n da adas, con mucho gusto le enviaremos sus piezas de reemplazo sin cargo extra. Canopy Metal Bed Twin Visite www.dhpfurniture.com/spa/support-home o llame gratis al 1-800-267-1739 Rosado Fecha de compra N mero de lote ESTE INSTRUCTIVO CONTIENE INFORMACION IMPORTANTE DE SEGURIDAD. POR FAVOR LEA Y GUARDE PARA SU REFERENCIA FUTURA.
Lea antes de comenzar a ensamblar Llame a nuestro n mero gratuito si necesita asistencia. Trabaje en un rea espaciosa y cerca de donde su producto ser utilizado, preferiblemente sobre una alfombra o utilice el cart n del empaque para proteger su piso y su producto. El n mero de personas recomendadas para el montaje de este producto es: 2 (sin embargo es recomendable contar con ayuda adicional). Tiempo estimado de ensamble es 1.5 horas. Aseg rese de que todas las partes est n incluidas.
Instrucciones Paso 1 Insertar (T) X 2 dentro de (A/B) & (C/D) con PERNOS 1. Paso 2 Insertar (F) X 2 dentro de (E) X 2 con PERNOS 3. Paso 3 Una la subconjunto (E/F) del paso anterior con(A), (B), (C) & (D) con PERNOS 2. Una la parte (G) con (E) X 2 con PERNOS 2. Paso 4 Una la parte (M)X2 con (G) con PERNOS 1. Paso 5 Una la parte (G) con (E) X 2 con PERNOS 1. Paso 6 Inserte (O) dentro de (E)&(F), a continuaci n, bloquee (O) en su lugar con (Y) como se muestra.
4020759 NE RETOURNEZ PAS AU MAGASIN ! Si une pi ce est manquante ou endommag e, nous vous exp dierons avec plaisir vos pi ces de remplacement gratuitement. Canopy Metal Bed Twin Visitez www.dhpfurniture.
Avant de commencer l'assemblage Si vous avez besoin d'aide, appelez notre service la client le sans frais. Travailler dans un endroit spacieux et pr s du lieu o l'unit sera utilis e, pr f rablement sur un tapis, ou sur un morceau de l'emballage pour prot ger le plancher et le produit. Nombre de personnes recommand pour l'assemblage: 2 (cependant il vaut mieux toujours d'avoir une main suppl mentaire). Le temps d'assemblage estim est de 1.5 heures. Assurez-vous que toutes les pi ces sont incluses.
Instructions tape 1 Ins rer (T) X 2 dans (A/B) & (C/D) avec BOULONS 1. tape 2 Ins rer (F) X 2 dans (E) X 2 avec BOULONS 3. tape 3 Attacher le sous-ensemble (E/F) de tape pr c dente (A), (B), (C) & (D) avec BOULONS 2. Attacher (G) (E) X 2 avec BOULONS 2. tape 4 Attacher (M) X 2 (G) avec BOULONS 1. tape 5 Attacher (G) (E) X 2 avec BOULONS 1. tape 6 Ins rer (O) en (E)&(F), puis verrouiller (O) en place avec (Y), telqu'illustr . tape 7 Attacher (R) X 4 (A, B, C & D) BOULONS 1. tape 8 8.
