4073939 TM Modern Canopy Full Metal Bed Gold Weight Limit: 450 Lb / 204 Kg Thank you for purchasing from DHP! DO NOT RETURN TO THE STORE ! If parts are missing or damaged, we will gladly ship your replacement parts free of charge. Visit www.dhpfurniture.com/eng/support-home or call Toll-Free 1-800-267-1739 Date of Purchase Lot Number THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. E.L.
Warranty Information Read Before Beginning Assembly DHP warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect. This warranty covers one year from the date of original purchase. This is solely limited to the repair or replacement of defective parts and assembly labor is not included. This warranty does not apply to any product which has been improperly assembled, subjected to misuse or abuse or which has been altered or repaired in any way.
B34407393900 3
B A Parts C Replacement Parts, Visit www.dhpfurniture.com/eng/support-home G M K All in 1 big box! There are inner box(es) that include components required to complete this assembly. Post T945810 Post T945820 Post T945830 Side Rail T946060 Upper Side Rail T945850 Upper Front/Rear Rail T946070 X1 X1 X2 X2 X2 X2 T I X H Before you throw the package, please use the Check Box to identify the parts and ensure that you have all the parts needed for the assembly.
1 2 Hardware Pack 5 4 3 Hardware Pack #: T4073139-01 5/16" X 3/4" 1/4" X 7/8" 1/4" X 1 1/16" X 20 X 16 X4 1/4" X 1 9/16" X2 1/4" X 2 3/4" X8 6 8 7 1/4" X2 X1 4mm X1 Hardware Note: Please do not completely tighten all the hardware, until the entire assembly is complete, unless otherwise indicated in the step-by-step instructions.
Step 1 Insert I X 2 into A with Attach T to A with . .
Step 2 Insert B onto I X 2 with Attach B to T with B I . . 3 5 T A Side rail holes on the same side.
Step 3 Attach T to C X 2 with . C T C Side rail holes on the same side.
Step 4 4 Attach H X 2 to G X 2 with .
Wide side of the slot should be facing up ! Step 5 Attach sub-assembly H & G from previous step to A, B and C with A .
Step 6 2 Attach X to H X 2 with and .
Step 7 Insert S X 4 into M X 2 with S .
Step 8 S 4 Insert K X 2 onto S with .
Step 9 Insert subassembly M/K/S from previous step into the slots of Posts A,B&C.
Step 10 1 U Attach U X 4 to A/B/C with .
Step 11 G 1 G Y 1 2 2 3 Insert P into G as illustrated, then lock P into place with Y.
P Step 12 Q W W 12.1 12.1 Insert W onto P as illustrated. 12.2 Attach Q to W alternating left and right as illustrated. 12.
Helpful Hints Weight Limit: 450 Lb / 204 Kg For your safety, do not climb or hang on the upper metal rails! Move your new furniture carefully, with two people lifting and carrying the unit to its new location. Your DHP furniture can be disassembled and reassembled to move. Some parts have been pre-assembled for this item. They are illustrated on this page and available for replacement. WARNINGS: For safety reasons and to prevent injuries: This bed is not intended for use by children under 4 years old.
4073939 NO LO REGRESE A LA TIENDA ! Si le faltan piezas o las que se incluyen est n da adas, con mucho gusto le enviaremos sus piezas de reemplazo sin cargo extra. Modern Canopy Full Metal Bed Visite www.dhpfurniture.com/spa/support-home o llame gratis al 1-800-267-1739 Oro Fecha de compra N mero de lote ESTE INSTRUCTIVO CONTIENE INFORMACION IMPORTANTE DE SEGURIDAD. POR FAVOR LEA Y GUARDE PARA SU REFERENCIA FUTURA.
Lea antes de comenzar a ensamblar Llame a nuestro n mero gratuito si necesita asistencia. Trabaje en un rea espaciosa y cerca de donde su producto ser utilizado, preferiblemente sobre una alfombra o utilice el cart n del empaque para proteger su piso y su producto. El n mero de personas recomendadas para el montaje de este producto es: 2 (sin embargo es recomendable contar con ayuda adicional). Tiempo estimado de ensamble es 1.5 horas. Aseg rese de que todas las partes est n incluidas.
Instrucciones Paso 1 Insertar I X 2 dentro de A con Una la parte T con A con . Paso 2 Insertar B dentro de I X 2 con L mites de peso: 450 Lb / 204 Kg . . Una la parte B con T con . Paso 3 Una la parte T con C X 2 con . Paso 4 Una la parte H X 2 con G X 2 con . Paso 5 Una la sub-ensamblaje H & G de la etapa anterior con A, B & C con . Paso 6 Una la X con H X 2 con y . Paso 7 Insertar S X 4 dentro de M X 2 con . Paso 8 Insertar K X 2 dentro de S con .
4073939 NE RETOURNEZ PAS AU MAGASIN ! Si une pi ce est manquante ou endommag e, nous vous exp dierons avec plaisir vos pi ces de remplacement gratuitement. Modern Canopy Full Metal Bed Visitez www.dhpfurniture.
Avant de commencer l'assemblage Si vous avez besoin d'aide, appelez notre service la client le sans frais. Travailler dans un endroit spacieux et pr s du lieu o l'unit sera utilis e, pr f rablement sur un tapis, ou sur un morceau de l'emballage pour prot ger le plancher et le produit. Nombre de personnes recommand pour l'assemblage: 2 (cependant il vaut mieux toujours d'avoir une main suppl mentaire). Le temps d'assemblage estim est de 1.5 heures. Assurez-vous que toutes les pi ces sont incluses.
Instructions tape 1 Ins rer I X 2 A avec Limite de Poids: 450 Lb / 204 Kg Conseils utiles . D placez votre nouveau mobilier avec soin, nous recommandons deux personnes pour soulever et transporter le mobilier vers son nouvel emplacement. Votre mobilier DHP peut tre d mont et reassembl pour faciliter les d m nagements. Certaines pi ces ont t pr -assembl es pour ce produit. Ils sont illustr s sur cette page et disponibles pour le remplacement. Attacher T A avec . tape 2 Ins rer B I X 2 avec .
