4107029 TM Emily Upholstered Bed Full Black Faux Leather Weight Limit: 450 Lb / 204 Kg Thank you for purchasing from DHP! DO NOT RETURN TO THE STORE ! If parts are missing or damaged, we will gladly ship your replacement parts free of charge. Visit www.dhpfurniture.com/eng/support-home or call Toll-Free 1-800-267-1739 Date of Purchase Lot Number THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. E.L.
Warranty Information Read Before Beginning Assembly DHP warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect. This warranty covers one year from the date of original purchase. This is solely limited to the repair or replacement of defective parts and assembly labor is not included. This warranty does not apply to any product which has been improperly assembled, subjected to misuse or abuse or which has been altered or repaired in any way.
B34410702900 3
A Parts A1 Replacement Parts, Visit www.dhpfurniture.com/eng/support-home B C D F All in 1 big box! There are inner box(es) that include components required to complete this assembly. Headboard T941730 Fabric Back Panel T941710 Footboard T941740 Side Panel 01 T927930 Side Panel 02 T927940 Side Rail 01 T926670 X1 X1 X1 X2 X2 X2 I H G J Before you throw the package, please use the Check Box to identify the parts and ensure that you have all the parts needed for the assembly.
1 3 2 Hardware Pack 5 4 Hardware Pack #: T4107119-00 1/4" X 3/4" X 40 1/4" X 1 3/8" X6 1/4" X 1 9/16" X 28 1/4" X 1 3/4" X3 5/16" X 2 1/4" X4 7 6 8 1/4" X3 Wrench X1 Hardware Note: 4mm X1 Please do not completely tighten all the hardware, until the entire assembly is complete, unless otherwise indicated in the step-by-step instructions.
Step 1 The slat holes on part (F) should be facing upward. C Attach (F)&(H) to (C)&(D) with BOLTS 3. Repeat the same step for remaining parts (C/D/F/H).
D The slat holes on part (G) should be facing upward. Step 2 Attach (G) x 2 to previous subassembly (C)&(D) with BOLTS 3. Repeat the same step for remaining parts (G).
Step 3 D C Attach (S) to (D) and (T) to (C)with BOLTS 1. Repeat the same step for the other subassembly (C) & (D).
Step 4 Stick (A1) to the back of (A) with Velcro as illustrated.
Step 5 Do not completely tighten the BOLTS 1 and 2, leave half of the thread exposed. A B 2 1 Screw BOLTS 2 into (A) and BOLTS 1 into (B), leave half of the bolts exposed.
Step 6 C A Hang (C) & (D) on (A) & (B) as illustrated, don't completely tighten the BOLTS untill STEP 10 is complete.
Step 7 5 Attach (N) to (Z) with BOLTS 5. Repeat the same step for remaining legs (Z).
C A C 2 D Step 8 8.1 Attach (N) x 4 to (A,B,C & D) with BOLTS 1; 8.2 Attach (L) x 2 to (H) with BOLTS 2. H N Z L 1 8.1 8.
Step 9 I Insert (I) x 2 & (J) into (M) x 2, then fix them with BOLTS 1. M J Slat holes on part (I & J) should be facing upward.
Step 10 Attach subassembly from previous STEP to (A) and (B) with BOLTS 1, then properly tighten all the bolts.
Step 11 7 Attach (K) to (F) x 2 & (J) with BOLTS 4 and NUTS 6.
Step 12 P X X Y P G P P 12.3 12.2 12.1 I 12.1 Insert (P) into (X); 12.2 Press (X) into (F&G), repeat the same procedure for the opposite side. 12.3 Insert both ends of slats (P) into (Y), then press (Y) into (I&J) as illustrated. Repeat the same procedures going backwards for every row of slats.
Helpful Hints Weight Limit: 450 Lb / 204 Kg Move your new furniture carefully, with two people lifting and carrying the unit to its new location. Your DHP furniture can be disassembled and reassembled to move. Some parts have been pre-assembled for this item. They are illustrated on this page and available for replacement. WARNINGS: For safety reasons and to prevent injuries: This bed is not intended for use by children under 4 years old. Prohibit jumping and horseplay on this bed.
4107029 NO LO REGRESE A LA TIENDA ! Si le faltan piezas o las que se incluyen est n da adas, con mucho gusto le enviaremos sus piezas de reemplazo sin cargo extra. Emily Upholstered Bed Full Visite www.dhpfurniture.com/spa/support-home o llame gratis al 1-800-267-1739 Negro Fecha de compra N mero de lote ESTE INSTRUCTIVO CONTIENE INFORMACION IMPORTANTE DE SEGURIDAD. POR FAVOR LEA Y GUARDE PARA SU REFERENCIA FUTURA.
Lea antes de comenzar a ensamblar Llame a nuestro n mero gratuito si necesita asistencia. Trabaje en un rea espaciosa y cerca de donde su producto ser utilizado, preferiblemente sobre una alfombra o utilice el cart n del empaque para proteger su piso y su producto. El n mero de personas recomendadas para el montaje de este producto es: 2 (sin embargo es recomendable contar con ayuda adicional). Tiempo estimado de ensamble es 2 horas. Aseg rese de que todas las partes est n incluidas.
Instrucciones Paso 1 Una la parte (F)&(H) con (C)&(D) con los PERNOS 3. Repita el paso para las otras partes(C/D/F/H). Paso 2 Una la parte (G) x 2 con (C)&(D) con los PERNOS 3. Repita el paso para las otras partes (G). Paso3 Una la parte (S) en (D), (T) en (C) con PERNOS 1. Repita el paso las otras partes (C) & (D). Paso 4 Pegue (A1) a la parte pos terior de (A) con el velcro como se ilustra. Paso 5 Atornille los PERNOS 2 en (A) y PERNOS 1 en (B) dejar la mitad de los PERNOS expuesta.
4107029 NE RETOURNEZ PAS AU MAGASIN ! Si une pi ce est manquante ou endommag e, nous vous exp dierons avec plaisir vos pi ces de remplacement gratuitement. Emily Upholstered Bed Full Visitez www.dhpfurniture.
Avant de commencer l'assemblage Si vous avez besoin d'aide, appelez notre service la client le sans frais. Travailler dans un endroit spacieux et pr s du lieu o l'unit sera utilis e, pr f rablement sur un tapis, ou sur un morceau de l'emballage pour prot ger le plancher et le produit. Nombre de personnes recommand pour l'assemblage: 2 (cependant il vaut mieux toujours d'avoir une main suppl mentaire). Le temps d'assemblage estim est de 2 heures. Assurez-vous que toutes les pi ces sont incluses.
Instructions tape 1 Attacher (F,H) (C,D) avec BOULONS 3. R p tez la m me tape pour les autres (C/D/F/H). tape 2 Attacher (G) (C,D) avec BOULONS 3. R p tez la m me tape pour les autres (G). tape 3 Attacher (S) (D), (T) (C) avec BOULONS 1. R p tez la m me tape pour les autres (C) et (D) e. tape 4 Coller (A1) l'arri re de (A) avec la Velcro, comme illustr . tape 5 Viser les BOULONS 2 (A) et BOULONS 1 (B), laisser la moiti des boulons expos e.
