Instruction Manual

14 15
Follow these instructions to use the
AiLivin app.
1. Plug in your machine to the
electrical outlet and turn on the
power.
2. To disable or enable the WiFi press
and hold the ON/OFF button on the
machine for 3 seconds.
3. Open the AiLivin app and follow
the instructions to create a new
account if you do not already have
one.
4. Follow the on-screen instructions
to pair your machine to the AiLivin
app. You will now be able to use
the AiLivin app to create custom
settings, monitor information from
the machine, control your machine,
schedule use and also keep up to
date with system upgrades.
Using the Schedule Function
NOTE: The Schedule function is only
available on the CAHP-05XX02C (WiFi
equipped) model via the AiLivin App.
Using the AiLivin App operation you can
set up a Schedule to turn the CleanAire
4 in 1 HEPA-PLASMA Air Purifier On
or Off time (like an alarm clock) in
advance. You can Schedule when the
unit will turn on and off. You can also
set up the desired operating mode—
including plasma on/off function, fan
speed, auto mode or sleep mode. For
example, if you set the machine on at
22:30 in sleep mode, it will be turned
on immediately at 22:30 at night and
enter the sleep mode.
Voice Control
You can use the AiLivin app to connect
your voice equipment for the control,
following the instruction codes your
voice equipment have.
If you experience problems
downloading the AiLivin app or pairing
with your device, first check that you
are connected to a WiFi network and
Bluetooth
®
wireless technology is
enabled on your mobile device and try
again. If you continue to experience
problems, please contact Customer
Assistance.
Filter Replacement
4-in-1 HEPA Filter Replacement
The filter should be replaced every 18
months or whenever indicated by the
Filter Replacement Indicator/Button on
the Control Panel. However this interval
is intended as a guideline only. In
environments with a high concentration
of contaminants such as dust, pet
dander, or cigarette/cigar smoke you
may need to replace the filter more
frequently.
NOTE: The filter is not washable. DO
NOT immerse it in water.
1. Make sure the Purifier is OFF and
unplugged.
2. Detach and remove magenetic
bottom cover from the unit.
3. Remove and replace the
replacement 4-in-1 HEPA filter into
the Purifier chassis.
NOTE: Ensure that the pull tabs are
facing outward to facilitate filter
removal later.
4. Inspect the screen on the bottom
cover and if necessary clean any
excess dust or dirt from the screen
using a hand held vacuum.
5. Replace the bottom cover by
placing the bottom cover into the
slots on the unit. Gently push the
top of the bottom cover into place.
6. Turn on the Purifier. After replacing
the filter, press and hold Filter
Replacement Indicator/Button for
3 seconds to reset the filter life
countdown.