Instruction Manual

12 13
Operating Modes
There are three operating modes
for the Purifier. When the Purifier is
turned on, the mode of operation will
return to the mode used the last time
it was operated.
•
Normal Mode
In Normal mode the Purifier
operates at a fixed fan speed. Press
this button repeatedly to toggle the
fan speed between 1-2-3 speeds.
•
Auto Mode
In Auto mode, the fan speed
is automatically adjusted to
correspond to the air quality
detected by the sensor. If the
sensor detects poor air quality, the
fan speed will be adjusted higher.
As the air quality improves, the fan
speed will be adjusted lower.
•
Sleep Mode
In Sleep mode, the fan speed is
reduced to an ultra slow speed to
minimize fan noise, and the light
ring is turned off.
Using the Remote Control
The Remote Control duplicates
the functions of the corresponding
buttons on the Control Panel. As Figure
3 showed, the power ON/OFF button,
Auto Mode button, Timer button,
Sleep Mode button, and Fan Speed
buttons perform the same functions
as the buttons on the Control Panel.
Note: Operating range of the remote is
approximately 16 feet.
Figure 3. Remote Control
Operating Alerts
As the Purifier operates, the following
alerts may be displayed.
Filter Replacement Indicator/
Button
•
Steady Red: 4-in-1 HEPA filter should
be replaced.
Air Quality Light Ring
•
Flashing blue with buzzer: Bottom
cover not in place.
•
Flashing red with buzzer for 5
times, then stop working: Internal
motor error.
•
Flashing red with buzzer, buzzer
2 times every 10s, the unit keep
working: Air quality sensor error.
Using the AiLivin App
The AiLivin app allows
you to control, schedule,
monitor, and customize
your settings for the
CleanAire 4 in 1 HEPA-PLASMA Air
Purifier from your mobile device over
your WiFi network. The AiLivin app can
be downloaded to your smartphone
from the Apple app store or Google
Play.
WiFi is enabled by default on WiFi
equipped units. Verify that your
mobile device is compatible with the
app, switched on, connected to a Wi-
Fi network with Bluetooth
®
wireless
technology enabled.
If you do not already have the AiLivin
app you will need to download it from
the App Store or Google Play (Please
scan QR code below), or CleanAire
website.