Manualshelf

Phau Ntawv Qhia

ManualsBrandsDH Lifelabs ManualsAir PurifierDH Lifelabs CAHP-50XX02C Sciaire Plus HEPA White Air Purifier
12345678910
1
2
3
5
4
Product Overview
1.
Main Body
2.
Plasma Generators (Internal)
3.
Plasma Generators (Internal)
4.
3-in-1 HEPA Filter
5.
Bottom Cover
353
4Copyright © 2022 Dernier & Hamlyn Inc. All rights reserved.
How It Works
The Sciaire + HEPA incorporates a 5-stage cleaning system to help clean the air. A fan
forces air through the unit from bottom to top.
Stage 1: Plasma Generators in the air inlet. The plasma generators enlarge the diameter of
particles and generates an electrostatic magnetic eld, thus improving the downstream HEPA lter's
absorption rates.
Stage 2: Pre-Filter. Captures large particulate matters including dust, pollen and hair.
Stage 3: H13 True HEPA Filter. The true High Efciency Particulate Air (HEPA) lter captures up to
99.97% of particles down to 0.3 microns in diameter.
Stage 4: Activated Carbon Filter. The activated carbon lter traps odors, gases, and volatile organic
compounds (VOCs).
Stage 5: Plasma Generators in the air outlet. The plasma generators generate positive ions and
negative ions that are diffused into the air. These ions keep killing bacteria and viruses in the room.
As the room is lled with negative oxygen ions, you will enjoy a fresh smell - like the forest after a rain
shower. The ozone generated is well within US EPA safety limits and the optimum concentration (less
than 0.05ppm).
Unpacking and Setup
1.
Remove the unit from the box and check that all the items are included. It is a good
idea to retain the packaging for storing the unit or in the event it must be shipped
back for service.
2.
The unit is shipped with the 3-in-1 HEPA lter sealed inside a protective package
wrap. Detach the bottom cover and remove the 3-in-1 HEPA lter from the package
wrap, then replace it inside the unit and replace the bottom cover.
3.
Locate the unit on a at, solid surface in proximity to an AC electrical outlet.
4.
Connect the AC adapter to the unit, and route the power cord to the outlet, but
do not plug it in yet. Make sure that the power cord is out of the way and does not
pose a tripping hazard, and is out of reach of children and pets. Connect the AC
adapter to the unit, and route the power cord to the outlet, but do not plug it in
yet. Make sure that the power cord is out of the way and does not pose a tripping
hazard, and is out of reach of children and pets.