User Guide

6Copyright © 2022 Dernier & Hamlyn Products Ltd. All rights reserved.
Connectivity
1.
On your smartphone, install DH Lifelabs app and turn your Bluetooth function on.
2.
Turn the device on.
3.
Open DH Lifelabs app and add the device.
4.
When the app indicates, press and hold the Wi-Fi Indicator for 3 seconds.
5.
The app should connect to the device over your Wi-Fi network and the Wi-Fi
Indicator will illuminate amber.
To disconnect from the network, press the Wi-Fi Indicator. The device will beep
and the indicator will illuminate red.
Cleaning and Maintenance
When the device is not used for an extended time, store it
in a cool dry place. Do not store the device where it might
be exposed to excess moisture or direct sunlight. May not
operate effectively in freezing temperatures. Use a dry cloth
to clean the exterior of the device. Do not use any chemicals
or cleaners.
Cleaning the Air Quality Sensor
The inlet for the air quality sensor is located at the back of
the device as shown. The inlet should be cleaned every 2
months using a vacuum or with a cotton swab that has been
lightly moistened with clean water.
Sciaire + HEPA can connect with your smart
device when you download the DH Lifelabs
App. Follow the steps below and/or in the App.
Works with Google Home or Amazon Alexa.
DH Lifelabs App
GET IT ON
GET IT ON
AIR QUALITY SENSOR