User Guide

2Copyright © 2022 Dernier & Hamlyn Products Ltd. All rights reserved.
!
For best performance, place the device
on the oor at least 3 feet from any wall
or device.
!
Always follow basic precautions when
using device to reduce the risk of re,
electric shock, and personal injury.
!
Ensure the electrical outlet used with
the device is not loose or damaged.
A poor electrical connection can result
in overheating and damage to the
power cord.
!
To disconnect the device, make sure it
is powered off, then grip the plug and
pull it from the wall outlet. NEVER pull
the cord to unplug it.
!
Keep the power cord away from hot
surfaces.
!
Do not use if you believe the device
has been damaged or is faulty. If the
device is not working properly or has
been dropped or damaged, contact
customer support.
!
Do not route the power cord under or
cover it with carpet. Route the power
cord to minimize the possibility that
someone could trip over it.
!
Do not expose the device to moisture:
avoid areas where it might come in
contact with water such as bathrooms
or laundry rooms.
!
Disconnect all power to the device and
turn off all controls before unplugging.
Always unplug the device if not in
use and while cleaning or other
maintenance.
!
The device is not user serviceable.
Do not attempt to repair the device
yourself. In the event of failure,
contact customer support.
!
If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualied
persons in order to avoid a hazard.
!
The input voltage is 220-240V, 50-60Hz.
!
Read all safety
instructions in this quick
start guide, the online
instruction manual, and
on device.