Phau Ntawv Qhia

5 6Copyright © 2022 Dernier & Hamlyn Inc. All rights reserved.
Cleaning Your Aaira + Humidifier
The unit should be cleaned regularly. Clean the water tank with fresh water. Use a
clean, dry cloth for the external surfaces of the machine. If water stays in the tank
for 7 days follow the alert process.
Storage
When the device is not used for an extended time, we recommend that you empty
the water tank and remove the CEF to let it dry, then store it in a cool dry place.
Do not store the device where it might be exposed to excessive moisture or direct
sunlight. The device may not operate effectively in very low temperatures. The
device can be damaged when exposed to sub-freezing temperatures.
Maintenance Alert
Flashing water level indicator
Flashing salt level indicator
Flashing blue light
Sound alert
What to do:
1.
Power off device
2.
Empty water tank
3.
Rinse the CEF
4.
Add 3 scoops total (3 grams)
of non-iodized salt
5.
Fill water to MAX line
Descaling
Lime scale builds up in the
machine over time. To ensure
the best performance, descale
monthly.
What to do:
1.
Power off device
2.
Empty water tank
3.
Take out the CEF
4.
Add 50ml (2 oz) of 5% white
vinegar; leave for 1 hour
(do not turn device power on)
5.
Empty and clean water tank
with fresh water
Operating Procedures
1.
Fill the water tank with clean water. DO NOT add salt to the tank.
2.
Press the Disinfect button to toggle the Disinfect function off. This will stop
the disinfection function.
Press the timer button to toggle through the options (2H-4H-8H-None). Once selected,
an internal timer controls operation of the purier for the selected duration. Once the
timer expires the purier enters standby mode.
NOTE: Do not use this option if you want the purier to run continuously.
Humidifier Operation
Timer Operation
1.
Press the On/Off button to turn the air purier on. A start-up sound will play and
all the indicators on the control panel will turn on for 3
seconds.
2.
The On/Off button will be illuminated white, indicating that the purier is in
standby mode.
3.
Press the On/Off button again to begin operation. The blue light in the water
tank will turn on, the fan speed will default to level 2, and the Disinfect button will
illuminate, indicating that the purier is actively
disinfecting the air in the room.
1.
Remove the CEF lid.
2.
Unscrew the CEF from the tank and discard. NOTE: Handle the new CEF by the end
caps to avoid touching the element, this will prevent possible contamination of the
lter element.
3.
Remove the replacement CEF from packaging and screw it into the bottom of the
water tank. Plug in the power cord.
4.
Turn on the Purier and press and hold the Disinfect button for three seconds to reset
the lter life countdown.
If you replace the lter before the accumulated life time is reached, the lter life timer
cannot be reset. To purchase replacement lters, please visit: www.dhlifelabs.com
CEF Replacement
4.
Press the fan speed button to toggle the fan speed between sleep, 2, and 3
speeds. When sleep mode is selected, fan speed is reduced and the blue light
inside the water tank will turn off.
5.
Press the power On/Off button again to turn the purier off.